Resina
Dal nostro blog.
Scopri guide mirate, risposte pratiche e idee creative su Resina. Continua a leggere gli articoli correlati per saperne di più.
Resina
Epoxy Polyurethane and UV Resin: Different Materials
Epoxy, polyurethane and UV-curable resins are different material systems.
Leggi la guida
What Is a Resin Figurine Made From?
A resin figurine is an object made partly or mainly from a resin-based material.
Leggi la guida
What Is a Mold in Resin Figure Making?
A mold is a shaped cavity used to reproduce an object's form. In resin casting, the mold helps define the outside of a casting, but it is only...
Leggi la guida
Silicone Mold Basics for Small Decorative Figures
Silicone molds can reproduce small decorative shapes, but “silicone” is not a universal compatibility promise.
Leggi la guida
Why Resin Mixing Ratios Cannot Be Guessed
For a multi-component resin, the mixing ratio belongs to the specific product.
Leggi la guida
Resin Pot Life vs Cure Time vs Demold Time
Pot life, demold time and cure time describe different stages. A resin that can be removed from a mold is not necessarily ready for finishing, packaging or its...
Leggi la guida
Why Do Bubbles Appear in Resin Castings?
Bubbles in a resin casting can come from air introduced during preparation, air trapped by the shape or material-specific reactions. A photograph alone rarely identifies which one occurred.
Leggi la guida
Why Resin Castings Can Stay Tacky
A tacky casting may reflect incomplete processing, an incorrect mix, incompatible additions or another material-specific problem.
Leggi la guida
How to Read a Resin Safety Data Sheet
A safety data sheet, or SDS, describes a chemical product's hazards and relevant handling information.
Leggi la guida
Is a Resin Craft Suitable for a Shared Living Space?
A shared living room, kitchen or bedroom should not automatically be treated as a resin workspace.
Leggi la guida
What Are Supports on a Resin 3D Print?
Supports on a resin print are temporary structures used during printing.
Leggi la guida
Why Resin Prints Need Washing and Post-Curing
A resin print emerging from a printer is not automatically a finished display object.
Leggi la guida
